Back to Resources
GUIDE

Onsite Badge Printing: The Complete Setup Guide

Everything event managers need to know about setting up onsite badge printing at conferences, exhibitions and trade shows.

8 min read

What Is Onsite Badge Printing?

Onsite badge printing is the process of printing attendee name badges at the event venue in real time, typically as each attendee checks in. This approach allows organisers to handle last-minute registrations, name changes and walk-ins without pre-producing individual badges in advance. The most common hardware used includes Zebra direct thermal badge printers (such as the ZD620 and ZD421) and Epson ColorWorks inkjet printers for full-colour output.

Choosing Your Badge Stock

The most important consumable for onsite badge printing is your badge stock. For Zebra direct thermal printers, you will need fanfolded direct thermal badge stock — available in 4×3 or 4×6 sizes, single or double sided. For Zebra thermal transfer printers, you will need ribbon in addition to your badge stock. For Epson inkjet printers, use inkjet-compatible badge stock specifically designed for the ColorWorks range. Always confirm your printer model before ordering badge stock to ensure compatibility.

Setting Up Your Printer

Load fanfolded badge stock from beneath the printer, feeding it upward through the media slot. Calibrate the printer to detect the black registration mark on the reverse of each badge — this mark tells the printer where each badge begins and ends. Most Zebra printers will auto-calibrate when you run a calibration feed. Ensure your driver settings match the badge dimensions (e.g. 4 inches × 3 inches) and disable any auto-scaling.

Consumable Quantities

A single fanfolded stack contains 250 badges. For a 1,000-attendee event, order a minimum of 4 stacks (1,000 badges) plus at least 10–15% contingency for test prints, spoilage and walk-ins. For events with pre-printed badge designs, factor in additional lead time — pre-printed badges should be ordered at least 10–14 working days before your event.

Integration with Registration Platforms

Modern onsite badge printing is typically integrated with registration platforms such as Cvent, Bizzabo, GES, EventMobi or Fielddrive. These platforms push attendee data to the printer via a print client or direct print queue. Ensure your badge template is configured correctly in the platform before the event, and always conduct a full test print run 48 hours before go-live.

Ready to order your event badges?

Configure Zebra-compatible fanfolded badges online in minutes.

Browse Products